Packard Bell 4X4 Desktop Top Cover Removal

Introducción

This guide will show you how to remove the top cover from a Packard Bell 4X4 desktop computer.

Using a Phillips screwdriver, remove the three Phillips head screws (circled in red) from the back of the computer.

With both hands on each side of the case, slide the top cover toward you. Lift it off the computer.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Miembro Desde 09/04/10

490 Reputación

3 Guías creadas

Community

1 Miembro

6 Guías creadas