Saltar al contenido principal

Pacific Image Electronics CS3600 Button Spring Replacement

Qué necesitas

  1. Pacific Image Electronics CS3600 Button Spring Replacement, Button Spring: paso 1, imagen 1 de 1
    • Begin opening the device by unscrewing the 5 following 9mm x 7mm screws with a J1 screwdriver.

  2. Pacific Image Electronics CS3600 Button Spring Replacement: paso 2, imagen 1 de 1
    • Once the screws have been removed, with light force open the scanner by pulling it apart at the seam.

  3. Pacific Image Electronics CS3600 Button Spring Replacement: paso 3, imagen 1 de 1
    • With a JIS J0 screwdriver remove the 1 screw that is 7mm x 6mm.

  4. Pacific Image Electronics CS3600 Button Spring Replacement: paso 4, imagen 1 de 1
    • Lift and move the plate with the connected wires out of the way.

  5. Pacific Image Electronics CS3600 Button Spring Replacement: paso 5, imagen 1 de 1
    • Remove the spring and replace it with a new one.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Amber Berry

Miembro Desde 03/21/17

101 Reputación

1 Guía escrita

Equipo

Texas Tech, Team S46-G2, Bennett Spring 2017 Miembro de Texas Tech, Team S46-G2, Bennett Spring 2017

TTU-BENNETT-S17S46G2

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 160