Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

This guide shows you how to remove the PSP Go's left trigger buttons.

Partes

No se especificaron partes.

  1. Use a plastic opening tool to gently flip up the left trigger connector.
    • Use a plastic opening tool to gently flip up the left trigger connector.

  2. Essential Electronics Toolkit

    Pequeño juego de herramientas. Grandes posibilidades.

    Shop Toolkits

    Essential
    Electronics
    Toolkit

    Shop Toolkits
  3. Unscrew the lone Phillips screw holding the trigger in place. Remove both trigger and retaining plate from the PSP Go. If necessary, repeat steps 2 and 3 to remove the right trigger button.
    • Unscrew the lone Phillips screw holding the trigger in place. Remove both trigger and retaining plate from the PSP Go.

    • If necessary, repeat steps 2 and 3 to remove the right trigger button.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,277