Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

PSP E1000 / E1004

not read UMD games and you haven't indication for insertion games. The problem probably is in UMD switch.

You can see the video:

Partes

No se especificaron partes.

Resumen del Video

  1. If you haven't indication for inserted disk the problem probably is in UMD switch. If you haven't indication for inserted disk the problem probably is in UMD switch. If you haven't indication for inserted disk the problem probably is in UMD switch.
    • If you haven't indication for inserted disk the problem probably is in UMD switch.

  2. Unhook the door metal plate and disassemble UMD door. Unhook the door metal plate and disassemble UMD door. Unhook the door metal plate and disassemble UMD door.
    • Unhook the door metal plate and disassemble UMD door.

  3. With a screwdriver I short the UMD switch to test the laser. With a screwdriver I short the UMD switch to test the laser.
    • With a screwdriver I short the UMD switch to test the laser.

  4. Now let's disassemble it. Now let's disassemble it. Now let's disassemble it.
    • Now let's disassemble it.

  5. Disconnect and remove the display. Disconnect and remove the display. Disconnect and remove the display.
    • Disconnect and remove the display.

  6. I must disconnect 7x cables and unscrew a screw. I must disconnect 7x cables and unscrew a screw.
    • I must disconnect 7x cables and unscrew a screw.

  7. Now I disconnect the battery connector and here is the mainboard. Now I disconnect the battery connector and here is the mainboard. Now I disconnect the battery connector and here is the mainboard.
    • Now I disconnect the battery connector and here is the mainboard.

  8. I used soldering station to remove the old one and put the new one (UMD switch). I used soldering station to remove the old one and put the new one (UMD switch).
    • I used soldering station to remove the old one and put the new one (UMD switch).

  9. Let's assemble and test it. Let's assemble and test it. Let's assemble and test it.
    • Let's assemble and test it.

  10. And it works!
    • And it works!

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

177,366 Reputación

316 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

295 Miembros

963 Guías creadas

Step 2 - picture number 3 is wrong, I broke off a little part of my PSP E1004. The left arrow points up but you have to pull it down, while trying to pry gently to the right. I learned the hard way after I managed to take it off.

Dukefazon - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 33

Ultimos 30 días: 141

Todo El Tiempo: 8,128