Saltar al contenido principal

Introducción

Steps for replacing the outer casing of a Sony PSP-3000.

  1. PSP 300x Casing Replacement, Battery: paso 1, imagen 1 de 3 PSP 300x Casing Replacement, Battery: paso 1, imagen 2 de 3 PSP 300x Casing Replacement, Battery: paso 1, imagen 3 de 3
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

  2. PSP 300x Casing Replacement, Casing: paso 2, imagen 1 de 1
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

  3. PSP 300x Casing Replacement: paso 3, imagen 1 de 2 PSP 300x Casing Replacement: paso 3, imagen 2 de 2
    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

  4. PSP 300x Casing Replacement: paso 4, imagen 1 de 1
    • Next, unscrew the two screws located at the top of the PSP.

  5. PSP 300x Casing Replacement: paso 5, imagen 1 de 1
    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

  6. PSP 300x Casing Replacement: paso 6, imagen 1 de 2 PSP 300x Casing Replacement: paso 6, imagen 2 de 2
    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

Conclusión

To reassemble your device, follow these instructions in reverse order.

22 personas más completaron esta guía.

kbrunner

Miembro Desde 05/11/09

57 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 19-2, Maness Fall 2009 Miembro de Cal Poly, Team 19-2, Maness Fall 2009

CPSU-MANESS-F09S19G2

3 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 30

Ultimos 30 días: 145

Todo El Tiempo: 12,390