Introducción

Steps for replacing the outer casing of a Sony PSP-3000.

  1. Place the PSP face down and locate the battery cover on the left side of the device.
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

    Agregar Comentario

  2. Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

      • Two are located behind the battery's warranty sticker.

      • Two are located on the right side of the PSP.

    Agregar Comentario

    • Next, unscrew the two screws located at the top of the PSP.

    Agregar Comentario

    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

    Agregar Comentario

    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

16 personas más completaron esta guía.

kbrunner

Miembro Desde 05/11/09

32 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 19-2, Maness Fall 2009 Miembro de Cal Poly, Team 19-2, Maness Fall 2009

CPSU-MANESS-F09S19G2

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 16

Últimos 30 Días: 81

Todo El Tiempo: 7,103