Saltar al contenido principal

Introducción

This guide will show you how to remove the PSP's housing/frame.

Partes

No se especificaron partes.

  1. PSP 1000 Front Casing Replacement, Battery: paso 1, imagen 1 de 1
    • Turn the PSP over so its back is facing you.

  2. PSP 1000 Front Casing Replacement: paso 2, imagen 1 de 2 PSP 1000 Front Casing Replacement: paso 2, imagen 2 de 2
    • Locate the battery casing button on the rear-left side of the PSP.

    • Press down the button and remove the battery cover.

  3. PSP 1000 Front Casing Replacement: paso 3, imagen 1 de 2 PSP 1000 Front Casing Replacement: paso 3, imagen 2 de 2
    • Using your finger, remove the battery upwards from the system as shown.

    The use of the opening tool is completely unnecessary. There is a finger actuated opening latch button that says “PUSH” on it. Simply press down with your thumb then slide your thumb down and away, dragining the battery door with it. It will then come off. Assuming the system still has its original plastics, they may have become brittle enough that the opening tool could damage the release button or the plastic cover.

    Franklin Allen - Contestar

  4. PSP 1000 Front Casing Replacement, Front Casing: paso 4, imagen 1 de 2 PSP 1000 Front Casing Replacement, Front Casing: paso 4, imagen 2 de 2
    • Remove the four screws shown with a Phillips #00 screwdriver.

    • You will have to peel back the guarantee sticker to access the screw on the lower left.

    Much luck to you if you have a tiny, metal screwdriver like I did, the screws might be stuck in there and may require some force.

    Squib - Contestar

    you need to peel back the warranty sticker in order to access both the lower left and lower left screws

    Frederick zzstu Geib - Contestar

    This is a bit misleading, you should only remove the two black screws in the battery compartment. The silver ones can stay.

    Damian Cartwright - Contestar

    The two left hand screws won’t come out of mine

    XULF - Contestar

  5. PSP 1000 Front Casing Replacement: paso 5, imagen 1 de 1
    • Remove the screw from the bottom side of the PSP. Keep it separated from the rest of the screws.

    • Remove screws from back righthand side within the holes.

  6. PSP 1000 Front Casing Replacement: paso 6, imagen 1 de 2 PSP 1000 Front Casing Replacement: paso 6, imagen 2 de 2
    • Gently separate the outer plastic casing from the rest of the system as shown.

Conclusión

To reassemble your device, follow these instructions in reverse order.

32 personas más completaron esta guía.

Henry Lee

Miembro Desde 14/01/10

731 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 5-6, Forte Winter 2010 Miembro de Cal Poly, Team 5-6, Forte Winter 2010

CPSU-FORTE-W10S5G6

5 Miembros

14 Guías creadas

3 comentarios

Thank you! Awesome help!

Jay Vee - Contestar

My psp is updating then psp is fallen down and battery comeout so please help me please thank you

Bye

National Nazeer - Contestar

i also made a video on this for anyone who needs to do it that way.

https://www.youtube.com/watch?v=EIAaJyIx...

DAS Repair - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 60

Ultimos 30 días: 243

Todo El Tiempo: 33,963