Repara tus cosas Comunidad Tienda

PS3 Dual Shock 3 Controler Charging Port Replacement

Introducción

To complete this repair, the user must possess skills in soldering, and proper tools needed to perform the repair.

Qué necesitas

  1. PS3 Dual Shock 3 Controler Charging Port Replacement, Opening the Controller: paso 1, imagen 1 de 1

    • Remove the 5 screws on the back of the controller.

    • The back housing of the controller can now be removed.

    Editar

  2. PS3 Dual Shock 3 Controler Charging Port Replacement, Removing the Battery: paso 2, imagen 1 de 1

    • Remove battery by unlatching the battery cables from battery connector clip.

    Editar

  3. PS3 Dual Shock 3 Controler Charging Port Replacement, Freeing the Motherboard: paso 3, imagen 1 de 1

    • Remove the two screws holding the motherboard to the front controller housing.

    • Next, remove the motherboard assembly from the controller housing. This is done by pressing in the clips on each side of the handle.

    • Freeing the motherboard from the housing will provide better access to the charging port.

    Editar

  5. PS3 Dual Shock 3 Controler Charging Port Replacement, Preparing the Soldering Station: paso 4, imagen 1 de 1

    • Prepare your station for the de-soldering of the charging port.

    Editar

  6. PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: paso 5, imagen 1 de 3 PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: paso 5, imagen 2 de 3 PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: paso 5, imagen 3 de 3
    Herramienta utilizada en este paso:
    Desoldering Pump
    $3.99
    Comprar

    • To remove the defective charging port, you will need to de-solder the 9 pins holding the port to the motherboard.

    • First, used the desoldering pump to remove the solder from all 9 pins.

    • Then, use the desoldering wick to remove any excess solder left on the motherboard.

    Editar

  7. PS3 Dual Shock 3 Controler Charging Port Replacement, Securing New Charging Port: paso 6, imagen 1 de 1

    • After the charging port is removed, place the new charging port into position.

    • Hold the new port in place by using a clip to keep it from moving.

    Editar

  8. PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: paso 7, imagen 1 de 2 PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: paso 7, imagen 2 de 2

    • Tin the soldering iron before soldering the connections. This is done by applying a small amount of solder to the tip of the hot iron.

    • Solder the 9 pin connections that connect the charging port to the motherboard.

    Editar
Conclusión

To reassemble your device, follow instructions 1-3 in reverse order.

15 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Attak

Miembro Desde 12/04/17

595 Reputación

1 Guía escrita

Insignias: 8

+ 5 más insignias

5 comentarios

Shall DualShock3 require other than GND and VBUS for charging only

and does DS3 follow the standards of USB-miniB (eg: Data wires flipping).

Sony does have some fame to sacrifice standards over extra capability delivery.

JanLS - Contestar

Would you guys happen to know, if my labeling is correct? I’m going to upgrade to USB-C.

https://imgur.com/a/RL68Yw5

Howling Beats - Contestar

Thank you it's really useful, tips,

Alan - Contestar

Thanks for this. But now there are four different USB charging ports, how to tell which one of them is suitable? kasynparts eg

kasynlife - Contestar

please attak if you still using this platfrom i really need you to help me with a ps3 controller pins

Deyaa Alshapshiri - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 63

Ultimos 30 días: 321

Todo El Tiempo: 17,176