Repara tus cosas Comunidad Tienda

PDP Victrix Pro BFG Headphone Jack Replacement

Qué necesitas

  1. PDP Victrix Pro BFG Headphone Jack Replacement, Headphone Jack: paso 1, imagen 1 de 1

    • Use the purple Module Swap Tool that comes with the device to remove the 4 hex screws.

    • Remove the joystick/button modules from the controller.

    Traducir

  2. PDP Victrix Pro BFG Headphone Jack Replacement: paso 2, imagen 1 de 1

    • Remove the two screws from the module compartments.

    Traducir

  3. PDP Victrix Pro BFG Headphone Jack Replacement: paso 3, imagen 1 de 2 PDP Victrix Pro BFG Headphone Jack Replacement: paso 3, imagen 2 de 2

    • Using the iFixit opening tool, gently pry open the two side grips.

    • Using the screwdriver tool with a head of around 2 mm, remove the screws located in the bottom outside corners.

    Traducir

  5. PDP Victrix Pro BFG Headphone Jack Replacement: paso 4, imagen 1 de 1

    • Flip the controller to the other side so the label on the bottom is facing upwards.

    • On the label, there is a circular icon; this shows the location of a single screw.

    • Using the same screwdriver head setting from the previous step, remove the screw.

    Traducir

  6. PDP Victrix Pro BFG Headphone Jack Replacement: paso 5, imagen 1 de 1

    • Flip the controller so the charging port of the controller is facing you.

    • Using a spudger, carefully pry open the front component.

    Traducir

  7. PDP Victrix Pro BFG Headphone Jack Replacement: paso 6, imagen 1 de 1

    • Flip the controller so it is upside-down, but the charging port is still facing you.

    • In the center of the now exposed part, there will be a hidden silver screw.

    • Use the flexible piece attached to the screwdriver to remove this screw.

    • Now that everything is loosened, gently pry open the controller along the grooves.

    Traducir

  8. PDP Victrix Pro BFG Headphone Jack Replacement: paso 7, imagen 1 de 1

    • Using the screwdriver tool with a smaller head, remove the three screws from each trigger.

    • Remove the triggers.

    Traducir

  9. PDP Victrix Pro BFG Headphone Jack Replacement: paso 8, imagen 1 de 1

    • Using the screwdriver, remove the two screws in the bottom two corners.

    • Using the halberd spudger, carefully pry the circuit board open.

    Traducir

  10. PDP Victrix Pro BFG Headphone Jack Replacement: paso 9, imagen 1 de 1

    • Using a soldering iron, desolder the headphone jack and resolder a new one in its place.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Ryan Brise

Miembro Desde 03/20/24

169 Reputación

1 Guía escrita

Insignias: 2

Equipo

UMass Dartmouth, Team 1-1, Santin Spring 2024 Miembro de UMass Dartmouth, Team 1-1, Santin Spring 2024

UMASSD-SANTIN-S24S1G1

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 20

Todo El Tiempo: 22