Repara tus cosas Comunidad Tienda

Osterizer Blender 14 Speed All Metal Drive Disassembly

Introducción

This blender is a staple of a majority of common households. It consists of a motherboard and motor that allows the blender to work. For this repair guide, our main focus is to disassemble the motor from the rest of the blender.

Qué necesitas

  1. Osterizer Blender 14 Speed All Metal Drive Disassembly, Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 1, imagen 1 de 2 Osterizer Blender 14 Speed All Metal Drive Disassembly, Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 1, imagen 2 de 2

    • Take the blender and place the top, cup, and blades aside

    • Blades of the blender are sharp, so when setting aside do not cut yourself

    Editar

  2. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 2, imagen 1 de 2 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 2, imagen 2 de 2

    • Flip over the base containing the motor of the blender

    • Use the Phillips Head Screwdriver to remove the 4 screws as pictured

    Editar

  3. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 3, imagen 1 de 1

    • Remove the bottom panel

    Editar

  4. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 4, imagen 1 de 1

    • Use an 11mm screwdriver to remove the screw from the fan blade

    • Remove the fan blade

    Editar

  6. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 5, imagen 1 de 1

    • Locate the washer beneath the fan and remove it from the motor

    • To remove the washer, twist it in a counterclockwise motion

    Editar

  7. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 6, imagen 1 de 2 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 6, imagen 2 de 2

    • Use a 6.5mm wrench and extender to remove the 2 screws holding the top of the motor in place

    Editar

  8. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 7, imagen 1 de 3 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 7, imagen 2 de 3 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 7, imagen 3 de 3

    • Take out the motor and copper wires from the blender

    Editar

  9. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 8, imagen 1 de 3 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 8, imagen 2 de 3 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 8, imagen 3 de 3

    • Disconnect the 2 white wires that connect the motor to the motherboard

    • These 2 wires have silver tips

    Editar

  10. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 9, imagen 1 de 3 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 9, imagen 2 de 3 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 9, imagen 3 de 3

    • Remove the 4 bolts connecting the motor to the blender wall using a socket wrench

    Editar

  11. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 10, imagen 1 de 1

    • Flip the blender back over to the original position and remove the metal disk located at the top of the blender using pliers

    Editar

  12. Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 11, imagen 1 de 2 Osterizer Blender 14 Speed All Metal Drive Disassembly: paso 11, imagen 2 de 2

    • Fully remove the motor from the blender

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Kaia Williams

Miembro Desde 11/22/22

193 Reputación

1 Guía escrita

Insignias: 5

+ 2 más insignias

Equipo

Group 2 ENGR communications project Miembro de Group 2 ENGR communications project

Community

4 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 16

Todo El Tiempo: 107