Repara tus cosas Comunidad Tienda

Oster Blend-N-Go My Blend Drinking Lid Seal Replacement

Introducción

Use this guide to replace your old or damaged Drinking Lid Seal.

Qué necesitas

  1. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: paso 1, imagen 1 de 2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Blender Bottle: paso 1, imagen 2 de 2

    • Grip the blender base with one hand and blender bottle with the other hand.

    • Rotate the blender bottle a quarter turn counterclockwise .

    • Lift the blender bottle out of the blender base. The blade assembly should still be attached to the blender bottle.

    Editar

  2. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 2, imagen 1 de 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 2, imagen 2 de 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 2, imagen 3 de 3

    • Grip the blade assembly with one hand and blender bottle with the other hand.

    • Rotate the blade assembly counterclockwise until it is completely unscrewed from the blender bottle.

    • Lift the blender bottle to separate it from the blade assembly.

    Editar

  3. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Assembly: paso 3, imagen 1 de 1

    • After removing the blade assembly from the blender bottle, ensure that your drinking lid assembly has its seal placed in the seal bed.

    Editar

  5. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 4, imagen 1 de 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 4, imagen 2 de 3 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 4, imagen 3 de 3

    • Grab the blender bottle with one hand and the drinking lid assembly with the other.

    • Place the drinking lid assembly onto the blender bottle and twist it clockwise until it is tight around the blender bottle.

    Editar

  6. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement, Drinking Lid Seal: paso 5, imagen 1 de 1

    • After separating the drinking lid assembly from the blender bottle, position the plastic opening tool on either side of the seal in the drinking lid assembly.

    • Wedge the tool between seal and seal seat wall.

    Editar

  7. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 6, imagen 1 de 2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 6, imagen 2 de 2

    • Gently pry the seal up while lifting seal out of the seal seat.

    Editar

  8. Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 7, imagen 1 de 2 Oster Blend-N-Go My Blend Drinking Lid Seal Replacement: paso 7, imagen 2 de 2

    • Press new seal into seal seat with finger.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Paul Long

Miembro Desde 08/27/15

710 Reputación

4 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

USF Tampa, Team 12-6, Blackwell Fall 2015 Miembro de USF Tampa, Team 12-6, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G6

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 6

Todo El Tiempo: 831