Saltar al contenido principal

Oster 6329 Outer Shell Removal

Qué necesitas

  1. Oster 6329 Outer Shell Removal, Outer Shell Removal: paso 1, imagen 1 de 2 Oster 6329 Outer Shell Removal, Outer Shell Removal: paso 1, imagen 2 de 2
    • Using the Phillips-head #2 screwdriver, unscrew the three 1cm Phillips-head screws on the plastic base of the toaster to separate the outer metal shell from the plastic base.

  2. Oster 6329 Outer Shell Removal: paso 2, imagen 1 de 1
    • Push the plastic push-down handle down and pull the plastic handle straight from metal arm.

  3. Oster 6329 Outer Shell Removal: paso 3, imagen 1 de 1
    • Loosen the outer metal shell from the plastic base by holding the plastic base while pulling up on the metal shell.

    • Only lift the outer shell a little so as not to disconnect the cables that connect the circuit board.

  4. Oster 6329 Outer Shell Removal: paso 4, imagen 1 de 2 Oster 6329 Outer Shell Removal: paso 4, imagen 2 de 2
    • Disconnect the cable clips from the circuit board using the tweezers to free the outer metal shell from the plastic base.

  5. Oster 6329 Outer Shell Removal: paso 5, imagen 1 de 2 Oster 6329 Outer Shell Removal: paso 5, imagen 2 de 2
    • Lift the top outer metal shell.

    • Carefully lift the outer metal shell at an angle so as not to damage the components in the front of the toaster.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Isaac Williams

Miembro Desde 01/24/14

225 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 13-15, Regan Winter 2014 Miembro de Cal Poly, Team 13-15, Regan Winter 2014

CPSU-REGAN-W14S13G15

5 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 21

Todo El Tiempo: 1,902