Repara tus cosas Comunidad Tienda

Oster 3905 Retractable Cord Replacement

Introducción

If your Oster 3905 cord isn’t retracting like the yo-yo you secretly still use, it may be time to replace it. While this replacement guide is pretty straight forward - watch out! There is a nasty little spring that will try to pop out and blind you.

Qué necesitas

  1. Oster 3905 Retractable Cord Replacement, Slot Levers: paso 1, imagen 1 de 1

    • Firmly grip your hand around the slot lever.

    Traducir

  2. Oster 3905 Retractable Cord Replacement: paso 2, imagen 1 de 1

    • Stabilize the toaster by placing your hand on top.

    Traducir

  3. Oster 3905 Retractable Cord Replacement: paso 3, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 3, imagen 2 de 2

    • Forcefully pull the slot lever away from the toaster by keeping parallel to the table.

    Traducir

  4. Oster 3905 Retractable Cord Replacement: paso 4, imagen 1 de 1

    • Both slot levers can be removed.

    Traducir

  5. Oster 3905 Retractable Cord Replacement, Outer Shell: paso 5, imagen 1 de 1

    • Place the toaster upside down so the bottom is facing the ceiling.

    Traducir

  6. Oster 3905 Retractable Cord Replacement: paso 6, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 6, imagen 2 de 2

    • Take off both rubber feet using a small metal spudger.

    • Wedge a spudger under the feet and pull up to pop off.

    Traducir

  7. Oster 3905 Retractable Cord Replacement: paso 7, imagen 1 de 1

    • Use a PH#2 screw bit to remove eight 12mm screws that are located around the perimeter.

    • There are two screws under the rubber feet.

    Traducir

  9. Oster 3905 Retractable Cord Replacement: paso 8, imagen 1 de 1

    • Place the toaster right side up.

    Traducir

  10. Oster 3905 Retractable Cord Replacement: paso 9, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 9, imagen 2 de 2

    • Grab the outer shell firmly and pull up towards the face of the toaster.

    Traducir

  11. Oster 3905 Retractable Cord Replacement: paso 10, imagen 1 de 1

    • For this part, you might need to wiggle the toaster to get the outer shell off.

    • The shell will not completely come off until the motherboard is removed in the next step.

    Traducir

  12. Oster 3905 Retractable Cord Replacement: paso 11, imagen 1 de 3 Oster 3905 Retractable Cord Replacement: paso 11, imagen 2 de 3 Oster 3905 Retractable Cord Replacement: paso 11, imagen 3 de 3

    • Use a J1 screw bit to unscrew eight 8mm screws from the motherboard.

    Traducir

  13. Oster 3905 Retractable Cord Replacement: paso 12, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 12, imagen 2 de 2

    • Take out the grey “cancel” and “bagel” buttons from the shell.

    Traducir

  14. Oster 3905 Retractable Cord Replacement, Retractable Cord: paso 13, imagen 1 de 1

    • Rotate the toaster so that the back is facing towards you.

    Traducir

  15. Oster 3905 Retractable Cord Replacement: paso 14, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 14, imagen 2 de 2

    • Use the PH#1 bit to remove one 8mm screw located above the wire on the casing.

    • Then use the same screw bit to remove two 10mm screws found at the bottom.

    Traducir

  16. Oster 3905 Retractable Cord Replacement: paso 15, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 15, imagen 2 de 2

    • Using the metal spudger, pry next to the black clip found at the base of the toaster and the casing.

    • Push down to separate the casing from the toaster.

    Traducir

  17. Oster 3905 Retractable Cord Replacement: paso 16, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 16, imagen 2 de 2

    • Gently tilt the casing towards the toaster as you pull up from the base.

    Traducir

  18. Oster 3905 Retractable Cord Replacement: paso 17, imagen 1 de 1

    • Use the PH#1 bit to remove the three 8mm screws located on the back side of the casing.

    Traducir

  19. Oster 3905 Retractable Cord Replacement: paso 18, imagen 1 de 2 Oster 3905 Retractable Cord Replacement: paso 18, imagen 2 de 2

    • When opening the casing a metal spring may suddenly pop out.

    • Use the metal spudger to pry open the two halves of the casing.

    • If you are having some trouble only using the metal spudger do not be afraid of using your fingers to pry the casing apart.

    Traducir

  20. Oster 3905 Retractable Cord Replacement: paso 19, imagen 1 de 3 Oster 3905 Retractable Cord Replacement: paso 19, imagen 2 de 3 Oster 3905 Retractable Cord Replacement: paso 19, imagen 3 de 3

    • Carefully remove the spool keeping your fingers on either side of the casing.

    • Tape down the metal spring to keep it from unraveling out of place.

    Traducir

  21. Oster 3905 Retractable Cord Replacement: paso 20, imagen 1 de 3 Oster 3905 Retractable Cord Replacement: paso 20, imagen 2 de 3 Oster 3905 Retractable Cord Replacement: paso 20, imagen 3 de 3

    • Carefully unwind the power cord from the spool.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Adam Dierkes

Miembro Desde 09/12/16

140 Reputación

1 Guía escrita

Insignias: 6

+ 3 más insignias

Equipo

CSU Fullerton, Team 2-1, Bruce Fall 2016 Miembro de CSU Fullerton, Team 2-1, Bruce Fall 2016

CSUF-BRUCE-F16S2G1

5 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 529