Saltar al contenido principal

Osmo Mobile Handle Disassembly

Qué necesitas

  1. Osmo Mobile Handle Disassembly, Osmo Mobile Handle Disassembly: paso 1, imagen 1 de 2 Osmo Mobile Handle Disassembly, Osmo Mobile Handle Disassembly: paso 1, imagen 2 de 2
    • Remove gimbal from base handle by loosening round plate found at the top of the handle.

  2. Osmo Mobile Handle Disassembly: paso 2, imagen 1 de 2 Osmo Mobile Handle Disassembly: paso 2, imagen 2 de 2
    • Use Phillips #00 screwdriver to remove the three screws found on the gimbal stabilizer to detach handle from gimbal.

    • Carefully detach handle from gimbal and disconnect the cable that connects the two.

  3. Osmo Mobile Handle Disassembly: paso 3, imagen 1 de 1
    • Locate the hex screws found at the top base of the handle, and unscrew using the 1.5mm hex screwdriver.

  4. Osmo Mobile Handle Disassembly: paso 4, imagen 1 de 2 Osmo Mobile Handle Disassembly: paso 4, imagen 2 de 2
    • Remove joystick by gently pulling away from handle

  5. Osmo Mobile Handle Disassembly: paso 5, imagen 1 de 3 Osmo Mobile Handle Disassembly: paso 5, imagen 2 de 3 Osmo Mobile Handle Disassembly: paso 5, imagen 3 de 3
    • Remove the quick release PCBA by locating the connecting wires and release the ribbon cable with tweezers.

    • Use the spudger to pry open and remove the face plate, starting at the back of the handle.

  6. Osmo Mobile Handle Disassembly: paso 6, imagen 1 de 3 Osmo Mobile Handle Disassembly: paso 6, imagen 2 de 3 Osmo Mobile Handle Disassembly: paso 6, imagen 3 de 3
    • Locate four screws directly on top of handle.

    • Unscrew the silver, bottom two screws, that are closest to the face plate using the 00 screwdriver.

    • Unscrew the black, top two screws, located furthest from the face plate, using the 0 screwdriver.

    • Remove the remaining two screws found on the front of the faceplate.

    • Remove the rest of the face plate shell.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Ustena Safa

Miembro Desde 09/28/17

330 Reputación

2 Guías creadas

Equipo

USF Tampa, Team S2-G1, Nance Fall 2017 Miembro de USF Tampa, Team S2-G1, Nance Fall 2017

USFT-NANCE-F17S2G1

4 Miembros

12 Guías creadas

10 comentarios

Bonjour,

La toute première étape est trop vague pouvez-vous donner plus de détails svp.

Je vous remercie d’avance

Guitt97ii - Contestar

I would not call that a handle disassembly. This instruction takes you up to the things you need to do PRIOR to disassembly.

I can show you the rest in a video format if you’re interested

John M O'Donovan - Contestar

Could you please show me how to fix the USB port that wenr inside the handle? on my Smove gimbal stabilizer

Juan Carlos Beltran -

My osmo has snapped off at the metal camera attachment. Can this be repaired ?

michelle Moore - Contestar

Your help would be greatly appreciated

Emile Jansen -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 56

Todo El Tiempo: 7,958