Saltar al contenido principal

Oregon Scientific Meep! X2 Microphone Replacement

Qué necesitas

  1. Oregon Scientific Meep! X2 Microphone Replacement, Rear Casing: paso 1, imagen 1 de 1
    • Remove the orange covers from the left and right sides of the device by sliding up against the tabs.

  2. Oregon Scientific Meep! X2 Microphone Replacement: paso 2, imagen 1 de 3 Oregon Scientific Meep! X2 Microphone Replacement: paso 2, imagen 2 de 3 Oregon Scientific Meep! X2 Microphone Replacement: paso 2, imagen 3 de 3
    • You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.

  3. Oregon Scientific Meep! X2 Microphone Replacement: paso 3, imagen 1 de 3 Oregon Scientific Meep! X2 Microphone Replacement: paso 3, imagen 2 de 3 Oregon Scientific Meep! X2 Microphone Replacement: paso 3, imagen 3 de 3
    • Use the plastic opening tools to undo the clips around the edges of the device.

  4. Oregon Scientific Meep! X2 Microphone Replacement, Microphone: paso 4, imagen 1 de 2 Oregon Scientific Meep! X2 Microphone Replacement, Microphone: paso 4, imagen 2 de 2
    • Use your tweezers to gently remove the microphone from the slot in the casing.

  5. Oregon Scientific Meep! X2 Microphone Replacement: paso 5, imagen 1 de 2 Oregon Scientific Meep! X2 Microphone Replacement: paso 5, imagen 2 de 2
    • Unsolder the microphone unit from the motherboard using the soldering station.

    • In the case of screen or screen sensor replacement, disregard desoldering steps.

Conclusión

To reassemble your device, follow these instructions in reverse order.

J'mel Henneman

Miembro Desde 01/20/15

864 Reputación

8 Guías creadas

Equipo

USF Tampa, Team 9-1, Blackwell Winter 2015 Miembro de USF Tampa, Team 9-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G1

3 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 2

Todo El Tiempo: 187