Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Oregon Scientific Meep! 4.0 Microphone Replacement

Qué necesitas

  1. Oregon Scientific Meep! 4.0 Microphone Replacement, Oregon Scientific Meep! 4.0 Disassembly: paso 1, imagen 1 de 1
    • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

  2. Oregon Scientific Meep! 4.0 Microphone Replacement: paso 2, imagen 1 de 1
    • Use a plastic opening tool to detach the clips on the inside of the device.

  3. Oregon Scientific Meep! 4.0 Microphone Replacement, Microphone: paso 3, imagen 1 de 1
    • Use a screwdriver to remove the three 7.0 mm Philips #00 screws and unscrew the motherboard.

  4. Oregon Scientific Meep! 4.0 Microphone Replacement: paso 4, imagen 1 de 1
    • Use a plastic opening tool to release the three ribbon cables attached to the motherboard.

  5. Oregon Scientific Meep! 4.0 Microphone Replacement: paso 5, imagen 1 de 2 Oregon Scientific Meep! 4.0 Microphone Replacement: paso 5, imagen 2 de 2
    • Lift up the motherboard and use a soldering station to remove the microphone from its wires.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jess Forte

Miembro Desde 09/25/15

434 Reputación

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 168