Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Follow the steps in this guide to replace the broken microphone of your Oregon Scientific Meep! 4.0 tablet.

  1. Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
    • Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.

  2. Use a plastic opening tool to detach the clips on the inside of the device.
    • Use a plastic opening tool to detach the clips on the inside of the device.

  3. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  4. Use a screwdriver to remove the three 7.0 mm Philips #00 screws and unscrew the motherboard.
    • Use a screwdriver to remove the three 7.0 mm Philips #00 screws and unscrew the motherboard.

  5. Use a plastic opening tool to release the three ribbon cables attached to the motherboard.
    • Use a plastic opening tool to release the three ribbon cables attached to the motherboard.

  6. Lift up the motherboard and use a soldering station to remove the microphone from its wires. Lift up the motherboard and use a soldering station to remove the microphone from its wires.
    • Lift up the motherboard and use a soldering station to remove the microphone from its wires.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jess Forte

Miembro Desde 25/09/15

434 Reputación

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 120