Qué necesitas
-
-
Remove the two 2 mm TR9 Torx head screws at the bottom of the device. The screws are located on the right and left side of the charging port.
-
-
-
-
Using a pair of angled tweezers, remove the metal plate protector.
-
Unplug the connector with a pair of tweezers.
-
Unplug the second connector with a pair of tweezers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
3 personas más completaron esta guía.