Repara tus cosas Comunidad Tienda

Oral-B White Pro 1000 Motherboard Replacement

Introducción

Motherboard Replacement guide for Oral-B White Pro 1000 rechargeable electric toothbrush due to faulty operation. This guide illustrates the disassembly of the Oral-B White Pro 1000 electric toothbrush. Use caution not to short the positive (+) and negative (-) terminals when handling the battery. This guide also requires the use of a soldering tool which reaches high temperatures. Refer to this helpful guide for some great soldering and desoldering tips.

Qué necesitas

  1. Oral-B White Pro 1000 Motherboard Replacement, Motherboard: paso 1, imagen 1 de 1

    • Remove the brush head by pulling the top away from the base.

    Editar

  2. Oral-B White Pro 1000 Motherboard Replacement: paso 2, imagen 1 de 3 Oral-B White Pro 1000 Motherboard Replacement: paso 2, imagen 2 de 3 Oral-B White Pro 1000 Motherboard Replacement: paso 2, imagen 3 de 3

    • Pry open the end cap from the toothbrush body.

    • Remove the spring.

    Editar

  3. Oral-B White Pro 1000 Motherboard Replacement: paso 3, imagen 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: paso 3, imagen 2 de 2

    • Apply pressure on the brush shaft to release the toothbrush internals.

    • Remove the internals through the bottom of the toothbrush body.

    Editar

  5. Oral-B White Pro 1000 Motherboard Replacement: paso 4, imagen 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: paso 4, imagen 2 de 2

    • Use flat head screwdriver to remove power button pressure plate.

    Editar

  6. Oral-B White Pro 1000 Motherboard Replacement: paso 5, imagen 1 de 3 Oral-B White Pro 1000 Motherboard Replacement: paso 5, imagen 2 de 3 Oral-B White Pro 1000 Motherboard Replacement: paso 5, imagen 3 de 3

    • Desolder the coil wire from the motherboard.

    • Check out this helpful guide for some soldering and desoldering tips.

    • Squeeze and remove coil from motherboard.

    Editar

  7. Oral-B White Pro 1000 Motherboard Replacement: paso 6, imagen 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: paso 6, imagen 2 de 2

    • Desolder the motor from motherboard.

    • Remove motherboard and battery from body of toothbrush internals.

    Editar

  8. Oral-B White Pro 1000 Motherboard Replacement: paso 7, imagen 1 de 2 Oral-B White Pro 1000 Motherboard Replacement: paso 7, imagen 2 de 2

    • Desolder the battery connections from the motherboard.

    • Remove motherboard from battery holder.

    Editar
Conclusión

Reattach new motherboard and reassemble your device following instructions in reverse order. Solder appropriate connections during reassembly.

2 personas más completaron esta guía.

Autor

con 3 otros colaboradores

Hannah Parker

Miembro Desde 11/08/17

203 Reputación

1 Guía escrita

Insignias: 6

+ 3 más insignias

Equipo

IUPUI, Team S5-G4, Baechle Fall 2017 Miembro de IUPUI, Team S5-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G4

3 Miembros

6 Guías creadas

Un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 83

Todo El Tiempo: 2,605