Saltar al contenido principal

Introducción

Opening the hood is required to access the engine bay and perform many vehicle maintenance tasks.

  1. Locate the hood latch beside the driver's side door, right next to the left foot rest. Locate the hood latch beside the driver's side door, right next to the left foot rest.
    • Locate the hood latch beside the driver's side door, right next to the left foot rest.

  2. Pull the latch toward you to release the hood.
    • Pull the latch toward you to release the hood.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Walk around to the front of the vehicle. Slide your hand under the hood, directly above the Honda emblem. Locate and pull the hood tab to unlock the hood.
    • Walk around to the front of the vehicle.

    • Slide your hand under the hood, directly above the Honda emblem. Locate and pull the hood tab to unlock the hood.

    • Once the tab is released, lift the hood up.

  5. Use your left hand to hold the hood up. Locate the hood stand and pull it out of the clip.
    • Use your left hand to hold the hood up. Locate the hood stand and pull it out of the clip.

  6. Place the tip of the hood stand into the hole located in the upper left of the hood.
    • Place the tip of the hood stand into the hole located in the upper left of the hood.

    • Let the hood rest on the stand.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Shaun MacDonald

Miembro Desde 03/10/12

1,976 Reputación

8 Guías creadas

Equipo

Cal Poly, Team 24-27, Regan Fall 2012 Miembro de Cal Poly, Team 24-27, Regan Fall 2012

CPSU-REGAN-F12S24G27

4 Miembros

17 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 8

Últimos 7 Días: 64

Últimos 30 Días: 266

Todo El Tiempo: 14,011