Qué necesitas
-
-
Use a TX10 screwdriver
-
Remove the housing screws on the rear of the device.
-
6 long screws
-
3 short screws
-
-
-
-
Place the device with the white lid facing up.
-
Start to carefully lift the lid at the front of the suction nozzle. Slowly work your way up to the stem.
-
-
-
Now you can lift the flap of the vacuum cleaner bag. This was only held by the white lid.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
