Saltar al contenido principal

One by Wacom Medium Disassembly

Qué necesitas

  1. One by Wacom Medium Disassembly, Preparing the device: paso 1, imagen 1 de 2 One by Wacom Medium Disassembly, Preparing the device: paso 1, imagen 2 de 2
    • Remove the pen from the pen holder

  2. One by Wacom Medium Disassembly, Remove screws: paso 2, imagen 1 de 2 One by Wacom Medium Disassembly, Remove screws: paso 2, imagen 2 de 2
    • Remove four rubber feet to reveal four Phillips #1 screws

    • Remove four Phillips #1 screws

  3. One by Wacom Medium Disassembly, Pry it open: paso 3, imagen 1 de 2 One by Wacom Medium Disassembly, Pry it open: paso 3, imagen 2 de 2
    • Use plastic pry tool to open the casing

    • To make this process easier, start prying from corners

    • Continue prying on every side till two casing sides are separated

  4. One by Wacom Medium Disassembly: paso 4, imagen 1 de 3 One by Wacom Medium Disassembly: paso 4, imagen 2 de 3 One by Wacom Medium Disassembly: paso 4, imagen 3 de 3
    • Remove the mainboard from the casing

    • If the USB port has to be replaced, be sure to remove the shielding from the back of the mainboard to avoid damaging it by high temperature

Conclusión

To reassemble your device, follow these instructions in reverse order.

00004707

Miembro Desde 07/23/20

1,055 Reputación

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 11

Ultimos 30 días: 72

Todo El Tiempo: 2,591