Repara tus cosas Comunidad Tienda

Olympus TG-820 iHS Locking Mechanism Replacement

Introducción

Are the seals on your locking mechanism wearing down? This guide will provide assistance in replacing and improving the water capability of your camera.

Qué necesitas

  1. Olympus TG-820 iHS Locking Mechanism Replacement, Battery: paso 1, imagen 1 de 1

    • Orient camera to look directly at battery compartment side as shown.

    Traducir

  2. Olympus TG-820 iHS Locking Mechanism Replacement: paso 2, imagen 1 de 3 Olympus TG-820 iHS Locking Mechanism Replacement: paso 2, imagen 2 de 3 Olympus TG-820 iHS Locking Mechanism Replacement: paso 2, imagen 3 de 3

    • Locate the two latches on the battery compartment.

    • First, move the "lock" switch left to reveal red indicator.

    • Next, move the "cover latch" switch downward to reveal red indicator.

    • You have to move the switches in that order for the compartment to unlatch.

    Traducir

  4. Olympus TG-820 iHS Locking Mechanism Replacement: paso 3, imagen 1 de 2 Olympus TG-820 iHS Locking Mechanism Replacement: paso 3, imagen 2 de 2

    • Allow the battery compartment latch to completely open.

    • Insert battery with the writing face up.

    • The bigger slot is for the battery. The smaller slot is for the memory card.

    • Battery not shown.

    Traducir

  5. Olympus TG-820 iHS Locking Mechanism Replacement, Locking Mechanism: paso 4, imagen 1 de 3 Olympus TG-820 iHS Locking Mechanism Replacement, Locking Mechanism: paso 4, imagen 2 de 3 Olympus TG-820 iHS Locking Mechanism Replacement, Locking Mechanism: paso 4, imagen 3 de 3

    • Locate and remove the 4.7mm Phillips #000 screw on the back side of the battery compartment locking mechanism.

    • Locate and remove the 4.7mm Phillips #000 screw on the front side of the battery compartment locking mechanism.

    Traducir

  6. Olympus TG-820 iHS Locking Mechanism Replacement: paso 5, imagen 1 de 1

    • Locate the two screws on the side of the battery compartment.

    • Remove the two 4.85mm Phillips #000 screws.

    Traducir

  7. Olympus TG-820 iHS Locking Mechanism Replacement: paso 6, imagen 1 de 2 Olympus TG-820 iHS Locking Mechanism Replacement: paso 6, imagen 2 de 2

    • Once all 4 screws are out, the back panel of the battery compartment will come off.

    • The entire battery compartment cover will also detach from the camera.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Larissa Knight

Miembro Desde 03/21/16

549 Reputación

5 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Clemson, Team 7-2, Benson Spring 2016 Miembro de Clemson, Team 7-2, Benson Spring 2016

CLEM-BENSON-S16S7G2

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 8

Todo El Tiempo: 437