Repara tus cosas Comunidad Tienda

Olympus TG-820 iHS LCD Screen Replacement

Introducción

Is your LCD screen unresponsive or not working properly? This guide will explain how to replace the LCD screen.

Qué necesitas

  1. Olympus TG-820 iHS LCD Screen Replacement, Battery: paso 1, imagen 1 de 1

    • Orient camera to look directly at battery compartment side as shown.

    Editar

  2. Olympus TG-820 iHS LCD Screen Replacement: paso 2, imagen 1 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 2, imagen 2 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 2, imagen 3 de 3

    • Locate the two latches on the battery compartment.

    • First, move the "lock" switch left to reveal red indicator.

    • Next, move the "cover latch" switch downward to reveal red indicator.

    • You have to move the switches in that order for the compartment to unlatch.

    Editar

  3. Olympus TG-820 iHS LCD Screen Replacement: paso 3, imagen 1 de 2 Olympus TG-820 iHS LCD Screen Replacement: paso 3, imagen 2 de 2

    • Allow the battery compartment latch to completely open.

    • Insert battery with the writing face up.

    • The bigger slot is for the battery. The smaller slot is for the memory card.

    • Battery not shown.

    Editar

  4. Olympus TG-820 iHS LCD Screen Replacement, Back Case: paso 4, imagen 1 de 1

    • Orient the camera so you are looking at the bottom.

    • Remove the three 3.85mm Phillips #00 screws from the bottom of the camera.

    Editar

  5. Olympus TG-820 iHS LCD Screen Replacement: paso 5, imagen 1 de 1

    • Orient the camera so you are looking at the side plate.

    • Remove the two 3.15mm Phillips #00 screws from the side plate of the camera.

    Editar

  7. Olympus TG-820 iHS LCD Screen Replacement: paso 6, imagen 1 de 2 Olympus TG-820 iHS LCD Screen Replacement: paso 6, imagen 2 de 2

    • Orient the camera so you are looking at the front plate.

    • Remove the two 3.8mm with the Phillips H1.5 from the front plate.

    • Remove the "Olympus" plate.

    Editar

  8. Olympus TG-820 iHS LCD Screen Replacement: paso 7, imagen 1 de 1

    • Remove face plate.

    Editar

  9. Olympus TG-820 iHS LCD Screen Replacement: paso 8, imagen 1 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 8, imagen 2 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 8, imagen 3 de 3

    • Locate three small black screws inside of the battery compartment.

    • Remove the 3.85mm Phillips #00 screw on the far left side.

    • Remove the two 5mm Phillips #00 screws on the right side

    Editar

  10. Olympus TG-820 iHS LCD Screen Replacement: paso 9, imagen 1 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 9, imagen 2 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 9, imagen 3 de 3

    • Orient the camera to be look at the top.

    • Remove the 5.4mm Phillips #00 screw on the top left side.

    • Remove the 7.4mm Phillips #00 screw next to the "ON/OFF" label.

    • Pry off top button plate with black nylon spudger.

    Editar

  11. Olympus TG-820 iHS LCD Screen Replacement: paso 10, imagen 1 de 2 Olympus TG-820 iHS LCD Screen Replacement: paso 10, imagen 2 de 2

    • Rotate to bottom of camera and locate bottom latch.

    • Wedge black nylon spudger in between bottom latch and camera base to release LCD Screen from camera.

    • Push firmly apart.

    • Some buttons might fall out.

    Editar

  12. Olympus TG-820 iHS LCD Screen Replacement: paso 11, imagen 1 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 11, imagen 2 de 3 Olympus TG-820 iHS LCD Screen Replacement: paso 11, imagen 3 de 3

    • Orient the camera to the LCD screen side that is now wedged open.

    • Locate the white ribbon cable and pull out from motherboard.

    • Locate the brown ribbon cable and pull out from motherboard.

    Editar

  13. Olympus TG-820 iHS LCD Screen Replacement, LCD Screen: paso 12, imagen 1 de 1

    • Now that ribbons are detached, orient plate as shown.

    • Remove the four black 2mm Phillips #00 screws.

    Editar

  14. Olympus TG-820 iHS LCD Screen Replacement: paso 13, imagen 1 de 2 Olympus TG-820 iHS LCD Screen Replacement: paso 13, imagen 2 de 2

    • Remove the six silver 3mm Phillips #00 screws.

    • Remove the last top 3.25mm Phillips #00 screw.

    Editar

  15. Olympus TG-820 iHS LCD Screen Replacement: paso 14, imagen 1 de 1

    • Using the black nylon spudger, pry out the metal plate.

    • This metal plate is the LCD component needing to be replaced

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Leslie Cade

Miembro Desde 03/21/16

343 Reputación

3 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

Clemson, Team 7-2, Benson Spring 2016 Miembro de Clemson, Team 7-2, Benson Spring 2016

CLEM-BENSON-S16S7G2

4 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 11

Todo El Tiempo: 3,247