Saltar al contenido principal

Olympus Stylus Tough-6000 On/Off Button Replacement

Qué necesitas

  1. Olympus Stylus Tough-6000 On/Off Button Replacement, Locate On/Off Button.: paso 1, imagen 1 de 1
    • First sit the camera on its bottom. You will be working on the on/off button.

  2. Olympus Stylus Tough-6000 On/Off Button Replacement: paso 2, imagen 1 de 1
    • Place camera upward.

    • You will notice two screws near the on/off button.

    • Use your Phillips #00 screwdriver to unscrew the two screws.

  3. Olympus Stylus Tough-6000 On/Off Button Replacement: paso 3, imagen 1 de 1
    • After unscrewing the two screws near the on/off button you will notice a single screw to your right.

    • Unscrew the single screw with your Phillips #00 screwdriver.

    • This will allow you to pry the panel off.

  4. Olympus Stylus Tough-6000 On/Off Button Replacement: paso 4, imagen 1 de 1
    • Grab your plastic opening tool and start prying off the panel.

  5. Olympus Stylus Tough-6000 On/Off Button Replacement: paso 5, imagen 1 de 1
    • Once the panel is lifted you will want to lift up the cover for the on/off button.

    • The actual on/off button is very small and loose so make sure to be careful with it!

  6. Olympus Stylus Tough-6000 On/Off Button Replacement: paso 6, imagen 1 de 1
    • You have reached the on/off button.

    • You can now replace it!

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Shannon Cooney

Miembro Desde 01/15/15

355 Reputación

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 4

Ultimos 30 días: 17

Todo El Tiempo: 583