Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Olympus Stylus 1010 LCD Display Replacement

Qué necesitas

  1. Olympus Stylus 1010 LCD Display Replacement, Disassembling Olympus Stylus 1010 Case: paso 1, imagen 1 de 2 Olympus Stylus 1010 LCD Display Replacement, Disassembling Olympus Stylus 1010 Case: paso 1, imagen 2 de 2
    • Remove the five Phillips #00 bottom and right side panel screws.

  2. Olympus Stylus 1010 LCD Display Replacement: paso 2, imagen 1 de 1
    • Remove the right side panel by pulling off the large silver piece.

  3. Olympus Stylus 1010 LCD Display Replacement: paso 3, imagen 1 de 2 Olympus Stylus 1010 LCD Display Replacement: paso 3, imagen 2 de 2
    • Remove the remaining three Phillips #00 side and front panel screws.

  4. Olympus Stylus 1010 LCD Display Replacement: paso 4, imagen 1 de 1
    • Using your thumb and forefinger, pull off the silver name plate and silver "T-shape" piece.

  5. Olympus Stylus 1010 LCD Display Replacement: paso 5, imagen 1 de 1
    • Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.

  6. Olympus Stylus 1010 LCD Display Replacement: paso 6, imagen 1 de 3 Olympus Stylus 1010 LCD Display Replacement: paso 6, imagen 2 de 3 Olympus Stylus 1010 LCD Display Replacement: paso 6, imagen 3 de 3
    • Remove the three Phillips #00 screws from the front of the camera.

    • Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.

  7. Olympus Stylus 1010 LCD Display Replacement: paso 7, imagen 1 de 3 Olympus Stylus 1010 LCD Display Replacement: paso 7, imagen 2 de 3 Olympus Stylus 1010 LCD Display Replacement: paso 7, imagen 3 de 3
    • Using a plastic spudger, lift up the black clips.

    • Still using the plastic spudger, detach the gold connector strip and white connector strip.

    • Using both hands, pull the camera apart into two pieces.

  8. Olympus Stylus 1010 LCD Display Replacement, LCD Display: paso 8, imagen 1 de 1
    • Peel up the blue and black tape. This can be done with a spudger.

  9. Olympus Stylus 1010 LCD Display Replacement: paso 9, imagen 1 de 2 Olympus Stylus 1010 LCD Display Replacement: paso 9, imagen 2 de 2
    • Unscrew the screws. (6 screws)( photo shows 7 screws -editorial comment)

  10. Olympus Stylus 1010 LCD Display Replacement: paso 10, imagen 1 de 2 Olympus Stylus 1010 LCD Display Replacement: paso 10, imagen 2 de 2
    • Push out the LCD screen by pushing on the screen side.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Curtis Reedy

Miembro Desde 01/12/11

267 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 13-4, Forte Winter 2011 Miembro de Cal Poly, Team 13-4, Forte Winter 2011

CPSU-FORTE-W11S13G4

6 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 4,547