Repara tus cosas Comunidad Tienda

Olympus SZ-12 Lens Replacement

Introducción

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Qué necesitas

  1. Olympus SZ-12 Lens Replacement, Back Case: paso 1, imagen 1 de 2 Olympus SZ-12 Lens Replacement, Back Case: paso 1, imagen 2 de 2

    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

    Editar

  2. Olympus SZ-12 Lens Replacement: paso 2, imagen 1 de 1

    • There are four screws to take out on the bottom of the camera.

    Editar

  3. Olympus SZ-12 Lens Replacement: paso 3, imagen 1 de 1

    • There are three screws to take out on this side.

    Editar

  4. Olympus SZ-12 Lens Replacement: paso 4, imagen 1 de 1

    • There is one screw to take out on this side.

    Editar

  5. Olympus SZ-12 Lens Replacement: paso 5, imagen 1 de 1

    • There is one hidden screw inside the HDMI port.

    Editar

  7. Olympus SZ-12 Lens Replacement: paso 6, imagen 1 de 1

    • Using the blue plastic opening tool, wedge open and remove the case.

    Editar

  8. Olympus SZ-12 Lens Replacement, LCD Screen: paso 7, imagen 1 de 1

    • Once you have the back case off, remove the LCD Screen.

    Editar

  9. Olympus SZ-12 Lens Replacement: paso 8, imagen 1 de 1

    • Using a plastic opening tool, gently lift the retaining flap on the display cable ZIF connector.

    • Pull the display cable from its socket on the motherboard.

    Editar

  10. Olympus SZ-12 Lens Replacement: paso 9, imagen 1 de 1

    • Remove the LCD screen from the device.

    • Be careful not to rip the display's ribbon cable as you pull the screen away from the device.

    Editar

  11. Olympus SZ-12 Lens Replacement, Lens: paso 10, imagen 1 de 2 Olympus SZ-12 Lens Replacement, Lens: paso 10, imagen 2 de 2

    • Remove the four 3.8mm Phillips #000 screws from the LCD frame.

    Editar

  12. Olympus SZ-12 Lens Replacement: paso 11, imagen 1 de 3 Olympus SZ-12 Lens Replacement: paso 11, imagen 2 de 3 Olympus SZ-12 Lens Replacement: paso 11, imagen 3 de 3

    • Remove the top left screw, top right screw, bottom left screw, and bottom right screw from LCD frame.

    Editar

  13. Olympus SZ-12 Lens Replacement: paso 12, imagen 1 de 3 Olympus SZ-12 Lens Replacement: paso 12, imagen 2 de 3 Olympus SZ-12 Lens Replacement: paso 12, imagen 3 de 3

    • Lift the retaining flaps on the three remaining ZIF connectors connected to the motherboard.

    Editar

  14. Olympus SZ-12 Lens Replacement: paso 13, imagen 1 de 1

    • Remove the five 4.3mm Phillips #000 screws from the lens frame to access the lens.

    • Remove the lens frame.

    Editar

  15. Olympus SZ-12 Lens Replacement: paso 14, imagen 1 de 3 Olympus SZ-12 Lens Replacement: paso 14, imagen 2 de 3 Olympus SZ-12 Lens Replacement: paso 14, imagen 3 de 3

    • Remove two 4.3mm Phillips #000 screws from black plastic piece surrounding the lens.

    • Remove the lens.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Un comentario

Is her anything in the lens assembly that I could look for which may have dislodged showing up as a shadow on the bottom of the display screen

Deacon - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 19

Todo El Tiempo: 1,613