Olympus SZ-12 LCD Screen Replacement

Introducción

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Qué necesitas

Paso 1 Back Case

Olympus SZ-12 LCD Screen Replacement, Back Case: paso 1, imagen 1 de 2

Olympus SZ-12 LCD Screen Replacement, Back Case: paso 1, imagen 2 de 2

Remove nine 4.45mm Phillips #000 screws from the outside of the case.

Editar

Paso 2

There are four screws to take out on the bottom of the camera.

Editar

Paso 3

There are three screws to take out on this side.

Editar

Paso 4

There is one screw to take out on this side.

Editar

Paso 5

There is one hidden screw inside the HDMI port.

Editar

Paso 6

Using the blue plastic opening tool, wedge open and remove the case.

Editar

Paso 7 LCD Screen

Olympus SZ-12 LCD Screen Replacement, LCD Screen: paso 7, imagen 1 de 1

Once you have the back case off, remove the LCD Screen.

Editar

Paso 8

Using a plastic opening tool, gently lift the retaining flap on the display cable ZIF connector.
Pull the display cable from its socket on the motherboard.

Editar