Introducción

Step by step instructions to clean or replace the control buttons on the camera.

Partes

No se requieren partes.

  1. Before disassembling your camera, be sure it is powered off.
    • Before disassembling your camera, be sure it is powered off.

    • Remove two screws from the video port located at the side panel of the camera.

    • Remove three screws from the bottom panel of the camera.

    Agregar Comentario

  2. Open the USB port cover, and remove three screws from inside.
    • Open the USB port cover, and remove three screws from inside.

    • Next, open the memory slot cover and remove the screw.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Use the blue opening tool to loosen and separate the back cover from the camera.

    Agregar Comentario

    • Locate and unscrew the three screws inside the back cover body (picture 3) .

    • Remove button pad assembly from the back cover.

    Agregar Comentario

    • The button assembly is now separate from the back cover.

    • Inspect for broken areas. Replace or clean the button parts.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 720