Repara tus cosas Comunidad Tienda

Oliver Bagel and Bun Slicer 702-N Blade Replacement

Introducción

The Oliver Bagel and Bun Slicer 702-N is a powerful tool when it comes to slicing bagels seamlessly in a fast manner. But when it comes to maintaining and replacing internal parts, it can seem daunting. The bagel slicer is composed of various individual parts where it seems impossible to even begin the process of disassembling the slicer. In addition, this is an outdated version so there isn't much support left of this product aside from digging through decades old articles.

The purpose of this guide is to help break down the process of disassembling and replacing the blade of the slicer in digestible parts so that anyone will be able to follow along the guide. The guide will include tips to encourage proper organization of parts and safety practices during disassembly. The photos will act as an essential visual aid so users can reference as they follow the guide so that they know they're following the guide correctly.

Although cut gloves aren't necessary for disassembly, we highly recommend wearing them as the blade is extremely sharp and improper usage can lead to moderate cuts. Some workplaces even require its employees to wear them as part of workplace safety. So please, keep your hands safe and put on cut gloves!

Qué necesitas

  1. Oliver Bagel and Bun Slicer 702-N Blade Replacement, Blade: paso 1, imagen 1 de 1

    • Remove the black knob underneath the bagel slicer base by twisting it counterclockwise.

    Editar

  2. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 2, imagen 1 de 1

    • On the left end of the slicer, repeat the previous step to remove the bottom knob.

    Editar

  3. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 3, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 3, imagen 2 de 2

    • Remove the knob located in the middle by twisting it counterclockwise.

    • After removing the knob, smoothly pull out the lock.

    Editar

  4. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 4, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 4, imagen 2 de 2

    • Locate the knob on the left and repeat Step 3 to remove the knob and lock.

    Editar

  5. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 5, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 5, imagen 2 de 2

    • While holding the ends of the bagel chute, lift the entire chute up and set it aside.

    • When you remove the chute, the sharp blade will be exposed. Take further caution as you proceed through the guide.

    Editar

  6. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 6, imagen 1 de 3 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 6, imagen 2 de 3 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 6, imagen 3 de 3

    • Remove all three nuts on the blade cover.

    • It’s important to separate and organize the different small parts in each step to ensure a smooth reassembling process.

    Editar

  7. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 7, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 7, imagen 2 de 2

    • Carefully lift up the blade cover and set aside.

    Editar

  8. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 8, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 8, imagen 2 de 2

    • Remove the black knobs on both sides of the blade and set aside.

    • Make sure that you keep these knobs separate from the knobs in Steps 1-6 as they look identical but are not interchangeable between each other.

    Editar

  10. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 9, imagen 1 de 1

    • Carefully lift up the part and set aside.

    • Hold the part by its ends so that your hands are as far from the blade as possible.

    Editar

  11. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 10, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 10, imagen 2 de 2

    • Put on cut gloves before proceeding.

    • Using a 7/16 wrench, remove the three bolts.

    • You may spin the blade clockwise to make the removal process easier.

    Editar

  12. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 11, imagen 1 de 1

    • Carefully the lift the blade up and set aside in a safe spot.

    • Now is a great time to clean and wipe down all individual parts if needed.

    Editar

  13. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 12, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 12, imagen 2 de 2

    • With a new blade, place the blade down and align the holes with the holes of the bagel slicer base.

    Editar

  14. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 13, imagen 1 de 1

    • Hold the blade with your non-dominant hand to keep it steady.

    • Screw back in all three bolts of the blade with your by twisting it clockwise.

    Editar

  15. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 14, imagen 1 de 1

    • Once the bolts are somewhat secured, use the 7/16 wrench again to tighten them until firm.

    Editar

  16. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 15, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 15, imagen 2 de 2

    • Insert the part with the outward sticking bolt and place the part down.

    • Make sure to align the outward sticking bolt's hole with the screw.

    Editar

  17. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 16, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 16, imagen 2 de 2

    • Twist the black knobs clockwise on both sides of the part until firmly tight.

    • Make sure you are using the same black knobs you removed in Step 10.

    Editar

  18. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 17, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 17, imagen 2 de 2

    • Align the holes of the bagel cover with the bolts and place the cover down.

    Editar

  19. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 18, imagen 1 de 3 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 18, imagen 2 de 3 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 18, imagen 3 de 3

    • Twist all three nuts on the bagel cover clockwise until tight.

    Editar

  20. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 19, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 19, imagen 2 de 2

    • On the bagel chute you removed in Step 5, align the lock's hole with the bolt.

    • Place a black knob on top and twist clockwise until tight.

    Editar

  21. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 20, imagen 1 de 3 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 20, imagen 2 de 3 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 20, imagen 3 de 3

    • Repeat Step 19 for the other knob.

    • After completing Steps 19 and 20, your bagel chute should look like the third image.

    Editar

  22. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 21, imagen 1 de 2 Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 21, imagen 2 de 2

    • Place the bagel chute on top of the metallic slicer base.

    • The bottom part of the lock should go underneath the base.

    • Line up the holes of the locks with the bolts and twist a black knob into the hole of the base.

    • Due to the obscure position of the bolt, you can insert the black knob into the lock first and move it back and forth until you feel a hole.

    Editar

  23. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 22, imagen 1 de 1

    • Repeat Step 21 for the lock on the other side.

    Editar

  24. Oliver Bagel and Bun Slicer 702-N Blade Replacement: paso 23, imagen 1 de 1

    • Plug in the power cord to an outlet and turn it on. If it doesn't make a loud screeching sound, you've successfully reassembled the bagel slicer!

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Andre Lam

Miembro Desde 02/03/23

337 Reputación

1 Guía escrita

Insignias: 3

Equipo

UC Davis, Team 1-3, Andersen Winter 2023 Miembro de UC Davis, Team 1-3, Andersen Winter 2023

UCD-ANDERSEN-W23S1G3

2 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 28

Todo El Tiempo: 349