Qué necesitas
-
-
Using the Phillips screwdriver, unscrew the 5 size M2 x .4 x 4mm screws underneath the battery.
-
-
-
-
Turn the bottom half with the keyboard upside down.
-
Lift the black tab up to free the ribbon cable.
-
Carefully pull the ribbon cable out from the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.
2 comentarios
Step #15 is wrong, disconnect the right blue cable instead of the left.
This also works on the XO-1