Saltar al contenido principal

Qué necesitas

  1. Nvidia Shield Tablet Rear Case Replacement, Rear Case: paso 1, imagen 1 de 2 Nvidia Shield Tablet Rear Case Replacement, Rear Case: paso 1, imagen 2 de 2
    • First, remove the stylus from your tablet.

  2. Nvidia Shield Tablet Rear Case Replacement: paso 2, imagen 1 de 3 Nvidia Shield Tablet Rear Case Replacement: paso 2, imagen 2 de 3 Nvidia Shield Tablet Rear Case Replacement: paso 2, imagen 3 de 3
    • Set the tablet so the buttons, microSD, and stylus port are facing you.

    • Open the microSD slot.

    • Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.

    • You may want to put on your anti-static wrist strap at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.

  3. Nvidia Shield Tablet Rear Case Replacement: paso 3, imagen 1 de 2 Nvidia Shield Tablet Rear Case Replacement: paso 3, imagen 2 de 2
    • As you remove your case, be aware of small clips along the edges.

    • Finally, set the old casing aside.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Molly Bauer

Miembro Desde 27/08/15

1,400 Reputación

6 Guías creadas

Equipo

USF Tampa, Team 2-2, Blackwell Fall 2015 Miembro de USF Tampa, Team 2-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S2G2

3 Miembros

11 Guías creadas

Un comentario

I snapped the cable of the dabbler on the rear case coz i didnt know there was one!

Anyone knows where can i get a new one?

damjannedelkovski - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 17

Todo El Tiempo: 3,171