Saltar al contenido principal

Nvidia Shield Battery Assembly Replacement

Qué necesitas

  1. Nvidia Shield Battery Assembly Replacement, Remove Front Panel: paso 1, imagen 1 de 3 Nvidia Shield Battery Assembly Replacement, Remove Front Panel: paso 1, imagen 2 de 3 Nvidia Shield Battery Assembly Replacement, Remove Front Panel: paso 1, imagen 3 de 3
    • Remove the seven 6.4mm T5 Torx screws from the back panel.

    • Use the spudger to separate the front and back panels.

    For the rubber screw covers, it is easiest to push at them at the top, otherwise you have the possibility of damaging the surrounding rubber.

    Any hints at getting the center plastic screw cover out?

    Miles Raymond - Contestar

  2. Nvidia Shield Battery Assembly Replacement, Remove Green Grill: paso 2, imagen 1 de 2 Nvidia Shield Battery Assembly Replacement, Remove Green Grill: paso 2, imagen 2 de 2
    • The green grill is not screwed in so it can be pulled right out.

  3. Nvidia Shield Battery Assembly Replacement, Remove Battery Cables: paso 3, imagen 1 de 3 Nvidia Shield Battery Assembly Replacement, Remove Battery Cables: paso 3, imagen 2 de 3 Nvidia Shield Battery Assembly Replacement, Remove Battery Cables: paso 3, imagen 3 de 3
    • Remove the six 6.5mm T5 Torx screws.

    • Disconnect the power wires.

    • Peel back the copper tape and disconnect the black and white wires.

  4. Nvidia Shield Battery Assembly Replacement, Remove Battery Apparatus: paso 4, imagen 1 de 1
    • Pull the battery apparatus out once all cables are removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Equipo

USF Tampa, Team 1-1, Hickman Fall 2014 Miembro de USF Tampa, Team 1-1, Hickman Fall 2014

USFT-HICKMAN-F14S1G1

4 Miembros

18 Guías creadas

4 comentarios

For replacement batteries, are they 18650? Do I want flat top or button tops?

evan - Contestar

Hello,

any idea what connector the battery uses? I have a replacement pack but they put the cable on the wrong side of the pack (doesn’t fit backwards either)

Brett - Contestar

The original cells are rated for 3.7v, 2450mAh, and I don't know how many amps but it's probably not that many. The form factor is flat-top 18650. I successfully did this repair using 3 Samsung 35E cells: https://www.18650batterystore.com/produc...

Charles Hall - Contestar

So, is this battery pack compatible? I read it has the connector in the wrong side

andres.430 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 15

Ultimos 30 días: 60

Todo El Tiempo: 5,979