Saltar al contenido principal

Introducción

Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.

  1. Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws). 2 of the screws will be star shaped rather than phillips head.
    • Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).

    • 2 of the screws will be star shaped rather than phillips head.

    • Remove the base plate.

  2. Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora

    Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora
  3. Identify the red and black wires topped with white-clear caps. Use pliers to squeeze the flattened part of both caps.
    • Identify the red and black wires topped with white-clear caps.

    • Use pliers to squeeze the flattened part of both caps.

    • The black and red wires attached to the power cord should be loose and ready to pull out.

  4. Replace the cord by slipping the new cord's black and red wires into the caps.
    • Replace the cord by slipping the new cord's black and red wires into the caps.

    • Pinch the middle of the cap back to the flattened position using the pliers.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Allie Decker

Miembro Desde 26/09/17

125 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S7-G1, Banghart Fall 2017 Miembro de Cal Poly, Team S7-G1, Banghart Fall 2017

CPSU-BANGHART-F17S7G1

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 5

Últimos 30 Días: 26

Todo El Tiempo: 592