Saltar al contenido principal

Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement

Qué necesitas

  1. Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement, Power Cord: paso 1, imagen 1 de 2 Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement, Power Cord: paso 1, imagen 2 de 2
    • Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).

    • 2 of the screws will be star shaped rather than phillips head.

    • Remove the base plate.

  2. Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement: paso 2, imagen 1 de 2 Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement: paso 2, imagen 2 de 2
    • Identify the red and black wires topped with white-clear caps.

    • Use pliers to squeeze the flattened part of both caps.

    • The black and red wires attached to the power cord should be loose and ready to pull out.

  3. Nutri Ninja Ninja Blender Duo BL641 Power Cord Replacement: paso 3, imagen 1 de 1
    • Replace the cord by slipping the new cord's black and red wires into the caps.

    • Pinch the middle of the cap back to the flattened position using the pliers.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Allie Decker

Miembro Desde 09/26/17

125 Reputación

1 Guía escrita

Equipo

Cal Poly, Team S7-G1, Banghart Fall 2017 Miembro de Cal Poly, Team S7-G1, Banghart Fall 2017

CPSU-BANGHART-F17S7G1

5 Miembros

6 Guías creadas

2 comentarios

Como puedo extraer la parte donde sienta el vaso de mi licuadora ninja ct641

Memorex com - Contestar

Como puedo extraer la base donde asienta el vaso de licuadora ninja ct641

Memorex com - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 17

Ultimos 30 días: 47

Todo El Tiempo: 3,635