Saltar al contenido principal

NuVision TM1088 Speaker Replacement

Qué necesitas

  1. NuVision TM1088 Speaker Replacement, Rear Cover: paso 1, imagen 1 de 1
    • Place the plastic opening tool between the front and rear cover and pry up on each corner of the cover.

  2. NuVision TM1088 Speaker Replacement, Speaker: paso 2, imagen 1 de 1
    • Melt the solders with a heat gun and remove red and black wires.

  3. NuVision TM1088 Speaker Replacement: paso 3, imagen 1 de 1
    • Peel the speaker off the rear cover. It is only held in by a small amount of glue.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

UMass Dartmouth, Team 1-1, Miles Spring 2015 Miembro de UMass Dartmouth, Team 1-1, Miles Spring 2015

UMASSD-MILES-S15S1G1

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 732