Saltar al contenido principal

Novatel MiFi 2200 Case Replacement

Qué necesitas

  1. Novatel MiFi 2200 Case Replacement, Battery: paso 1, imagen 1 de 1
    • Remove the rear cover by pressing down on the cover and pulling it away from the device.

  2. Novatel MiFi 2200 Case Replacement: paso 2, imagen 1 de 1
    • Place your finger on the back of the battery located near the edge of the device.

    • Push your finger into the battery and lift up to pop the battery out of the device.

  3. Novatel MiFi 2200 Case Replacement, Case: paso 3, imagen 1 de 1
    • Using a metal spudger, pry open the device around the seam between the front and back cover.

    • It may be difficult to split apart, so use force with caution.

    • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

  4. Novatel MiFi 2200 Case Replacement: paso 4, imagen 1 de 1
    • Once the seal has been broken all the way around, open the cases using your hands.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Justin Russo

Miembro Desde 04/15/12

196 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 7-36, Maness Spring 2012 Miembro de Cal Poly, Team 7-36, Maness Spring 2012

CPSU-MANESS-S12S7G36

5 Miembros

5 Guías creadas

Un comentario

If case gets damaged, is there a place to but the case

Snehraj Merchant - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 1,529