Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

This guide will help you replace the handset in your Nortel Networks i2004 IP telephone. You may need to replace your handset if the microphone or speaker in the handset is not working.

  1. Turn the phone over to view the underside, where the handset cord connects. Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling straight out.
    • Turn the phone over to view the underside, where the handset cord connects.

    • Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling straight out.

  2. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  3. Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out. Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out.
    • Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out.

  4. Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.
    • Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 10-35, Amido Winter 2012 Miembro de Cal Poly, Team 10-35, Amido Winter 2012

CPSU-AMIDO-W12S10G35

4 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 1,190