Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Nokia Lumia 930 Vibration Module Replacement

Qué necesitas

  1. Nokia Lumia 930 Vibration Module Replacement, Battery: paso 1, imagen 1 de 1
    • Pull the SIM card holder out of the top of the phone using your fingernail.

  2. Nokia Lumia 930 Vibration Module Replacement: paso 2, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement: paso 2, imagen 2 de 2
    • Place tweezers or an opening tool in the SIM card slot and push upwards until the back panel pops out.

  3. Nokia Lumia 930 Vibration Module Replacement: paso 3, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement: paso 3, imagen 2 de 2
    • Wedge a plastic opening tool between the two panels. Slide it along each side of the phone to completely remove the back panel.

  4. Nokia Lumia 930 Vibration Module Replacement: paso 4, imagen 1 de 1
    • Remove the 4mm Torx #4 screw that's securing the battery connector.

  5. Nokia Lumia 930 Vibration Module Replacement: paso 5, imagen 1 de 1
    • Use tweezers to remove the battery connector strap.

  6. Nokia Lumia 930 Vibration Module Replacement: paso 6, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement: paso 6, imagen 2 de 2
    • Remove all ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.

  7. Nokia Lumia 930 Vibration Module Replacement: paso 7, imagen 1 de 3 Nokia Lumia 930 Vibration Module Replacement: paso 7, imagen 2 de 3 Nokia Lumia 930 Vibration Module Replacement: paso 7, imagen 3 de 3
    • Use the flat end of a spudger to pry the battery cover from the phone's frame.

  8. Nokia Lumia 930 Vibration Module Replacement: paso 8, imagen 1 de 1
    • Pull up on the heat spreader.

    • Be careful not to tear it!

  9. Nokia Lumia 930 Vibration Module Replacement: paso 9, imagen 1 de 1
    • Use the flat end of the spudger to lift up the battery.

    • The battery is glued in place. Pry up carefully, not to damage it.

    • Two flex cables are directly underneath the battery.

  10. Nokia Lumia 930 Vibration Module Replacement: paso 10, imagen 1 de 1
    • Remove the battery from the phone.

  11. Nokia Lumia 930 Vibration Module Replacement, Motherboard: paso 11, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement, Motherboard: paso 11, imagen 2 de 2
    • Use the flat end of a spudger to disconnect the camera connectors.

    • Pull the camera up and out to remove it from the phone.

  12. Nokia Lumia 930 Vibration Module Replacement: paso 12, imagen 1 de 1
    • Use the flat end of a spudger to disconnect the six ribbon cables from the motherboard.

  13. Nokia Lumia 930 Vibration Module Replacement: paso 13, imagen 1 de 3 Nokia Lumia 930 Vibration Module Replacement: paso 13, imagen 2 de 3 Nokia Lumia 930 Vibration Module Replacement: paso 13, imagen 3 de 3
    • Use the flat end of a spudger to pry up the orange flex cable underneath the battery.

    • Remove the orange flex cable from the phone.

  14. Nokia Lumia 930 Vibration Module Replacement: paso 14, imagen 1 de 1
    • Repeat the previous step for the black jumper flex cable under the battery.

  15. Nokia Lumia 930 Vibration Module Replacement: paso 15, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement: paso 15, imagen 2 de 2
    • Use the flat end of a spudger to disconnect both ends of the antenna cable from the motherboard.

    • Remove the antenna.

  16. Nokia Lumia 930 Vibration Module Replacement: paso 16, imagen 1 de 1
    • Use tweezers to grab the adhesive that is under the LTE flex cable and pull it outwards and towards the bottom end of the phone.

    • Apply new adhesive when reassembling the phone.

  17. Nokia Lumia 930 Vibration Module Replacement: paso 17, imagen 1 de 3 Nokia Lumia 930 Vibration Module Replacement: paso 17, imagen 2 de 3 Nokia Lumia 930 Vibration Module Replacement: paso 17, imagen 3 de 3
    • Use a spudger to pry up the bottom end of the motherboard, then pull it out.

  18. Nokia Lumia 930 Vibration Module Replacement, Daughterboard: paso 18, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement, Daughterboard: paso 18, imagen 2 de 2
    • Use the pointed end of the spudger to pry up the daughterboard.

    • Use tweezers to lift the daughterboard out of the phone.

  19. Nokia Lumia 930 Vibration Module Replacement, Vibration Module: paso 19, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement, Vibration Module: paso 19, imagen 2 de 2
    • Use a pair of tweezers to remove the vibration boot that covers the module.

  20. Nokia Lumia 930 Vibration Module Replacement: paso 20, imagen 1 de 1
    • Use the flat end of the spudger to lift the module off of the adhesive.

    • Be delicate so that you don't break off the rotating piece of the module.

  21. Nokia Lumia 930 Vibration Module Replacement: paso 21, imagen 1 de 2 Nokia Lumia 930 Vibration Module Replacement: paso 21, imagen 2 de 2
    • Use tweezers to continually lift the module and flex up off of the adhesive.

    • Pull up until the vibration module is completely removed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 289