Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the SIM card holder out of the top of the phone using your fingernail.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place tweezers or an opening tool in the SIM card slot and push upwards until the back panel pops out.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Wedge a plastic opening tool between the two panels. Slide it along each side of the phone to completely remove the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 4mm Torx #4 screw that's securing the battery connector.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove all ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the flat end of a spudger to pry the battery cover from the phone's frame.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the flat end of the spudger to lift up the battery.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.