Repara tus cosas

Derecho a reparar

Partes y herramientas

Nokia Lumia 930 Battery Replacement

Escrito Por: Brianna Rivera (y 2 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0
  • Terminaciones: 2

Dificultad

Moderar

Pasos

10

Tiempo Requerido

10 minutos

Secciones

1

Banderas

1

Better Introduction

Mejor introducción

Mejora esta guía completando o revisando su introducción.

Introducción

This guide will show you how to replace the battery on a Nokia Lumia 930 smartphone.

  1. Pull the sim card holder and the sim card out of the top of the phone using your fingernail.

    • Pull the sim card holder and the sim card out of the top of the phone using your fingernail.

    Traducir

  2. Place the tweezers in the sim card hole and upwards until the back panel pops out. Place the tweezers in the sim card hole and upwards until the back panel pops out.

    • Place the tweezers in the sim card hole and upwards until the back panel pops out.

    Traducir

  3. Wedge a plastic opening tool into the opening made in the previous step. Slide it along the edges to completely remove the back panel from the phone’s frame. Wedge a plastic opening tool into the opening made in the previous step. Slide it along the edges to completely remove the back panel from the phone’s frame.

    • Wedge a plastic opening tool into the opening made in the previous step. Slide it along the edges to completely remove the back panel from the phone’s frame.

    Traducir

  4. Remove the single 4mm Torx #4 screw that's securing the battery strap to the phone.

    • Remove the single 4mm Torx #4 screw that's securing the battery strap to the phone.

    Traducir

  5. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

  6. Use the tweezers to remove the battery connector strap.

    • Use the tweezers to remove the battery connector strap.

    Traducir

  7. Remove the ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone. Remove the ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.

    • Remove the ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.

    Traducir

  8. Use the flat end of the spudger to pry the battery cover apart from the phone frame. Use the flat end of the spudger to pry the battery cover apart from the phone frame. Use the flat end of the spudger to pry the battery cover apart from the phone frame.

    • Use the flat end of the spudger to pry the battery cover apart from the phone frame.

    Traducir

  9. Pull up on the heat spreader, being careful not to tear it.

    • Pull up on the heat spreader, being careful not to tear it.

    Traducir

  10. Use the flat end of the spudger to lift up the battery.

    • Use the flat end of the spudger to lift up the battery.

    • The batter is glued in place so pry carefully to not damage it.

    • Two flex cables are directly underneath the battery.

    Traducir

  11. Pull up to remove the battery from the phone.

    • Pull up to remove the battery from the phone.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 16

Ultimos 30 días: 95

Todo El Tiempo: 3,890