Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the back case of the phone using the plastic opening tool.
-
Remove the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the five screws shown in the photo using the torx Screwdriver 5mm.
-
Turn your phone sideways and you will find two more screws that you will need to remove using the Torx Screwdriver 5mm.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the black sticker on the bottom left side (As shown in the picture).
-
Remove the screw that was under the black sticker using the Torx Screwdriver 5mm.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using the plastic opening tool separate the plastic cover from the screen.
-
On the top left corner you will see the screens flex cable attached to the mother board, watch out when separating them.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully retrieve the camera and audio jack’s flex that is attached to the mother board as shown in the picture.
-
Retrieve the burnt Mother Board and replace it with the new one.
-
Cancelar: No complete esta guía.
14 personas más completaron esta guía.