Saltar al contenido principal

Introducción

Nokia Lumia 625 - how to remove / replace the back / rear bezel.

  1. Turn off the phone and remove the back cover. Remove any installed SIM or memory card. Use a screwdriver Torx T5 and remove the 8x black screws.
    • Turn off the phone and remove the back cover.

    • Remove any installed SIM or memory card.

    • Use a screwdriver Torx T5 and remove the 8x black screws.

  2. At the top and bottom of the phone you'll see two grooves. Use a plastic tool and start the separating the rear bezel from here. Use a plastic tool and start the separating the rear bezel from here.
    • At the top and bottom of the phone you'll see two grooves.

    • Use a plastic tool and start the separating the rear bezel from here.

Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

178,865 Reputación

315 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

298 Miembros

984 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 5

Todo El Tiempo: 1,151