Saltar al contenido principal

Introducción

How to disassemble Nokia Lumia 625 to change / replace the battery.

Resumen del Video

  1. Turn off the phone and remove the back cover. Remove any installed SIM or memory card. Use a screwdriver Torx T5 and remove the 8x black screws.
    • Turn off the phone and remove the back cover.

    • Remove any installed SIM or memory card.

    • Use a screwdriver Torx T5 and remove the 8x black screws.

  2. At the top and bottom of the phone you'll see two grooves. Use a plastic tool and start the separating the rear bezel from here. Use a plastic tool and start the separating the rear bezel from here.
    • At the top and bottom of the phone you'll see two grooves.

    • Use a plastic tool and start the separating the rear bezel from here.

  3. Disconnect the battery connector. Use a plastic tool and unstuck the battery. Look at the picture to see where is the battery adhesive sticker.
    • Disconnect the battery connector.

    • Use a plastic tool and unstuck the battery.

    • Look at the picture to see where is the battery adhesive sticker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

11 personas más completaron esta guía.

ZFix

Miembro Desde 09/12/13

179,064 Reputación

316 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

300 Miembros

990 Guías creadas

2 comentarios

Ok, that's cool

william - Contestar

Simple

Très compréhensible

Efficace

Bravo

Sandrine Loubatiere - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 35

Todo El Tiempo: 8,188