Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

  1. Check condition of switches on logicboard
    • Check condition of switches on logicboard

    • Rule out failure of cover

  2. Torx 6 screwdriver
    • Torx 6 screwdriver

    • Soldering iron (thin tip)

    • Decent quality solder (thin wire)

  3. Remove cover, battery and SIM
    • Remove cover, battery and SIM

    • Remove 6 torx screws

    • Note: Green is fine thread

    • Note: Red is coarse thread

  4. Remove plastic clover near battery Keep track of all parts
    • Remove plastic clover near battery

    • Keep track of all parts

  5. Kits de Reparación de Pantalla LCD de iPhone

    La opción de presupuesto, cubierta por nuestra garantía de por vida.

    Compra kits

    Kits de Reparación de Pantalla LCD de iPhone

    Reduce los costos de reparación, no la calidad.

    Compra kits
  6. Gently release logicboard connectors
    • Gently release logicboard connectors

  7. There is a clip that needs to be moved out of the way before the board will move. Start by lifting long side of logicboard
    • There is a clip that needs to be moved out of the way before the board will move.

    • Start by lifting long side of logicboard

    • Gently wiggle and lift

    • Undo plastic clips near battery with force

  8. Check connections of failed buttons
    • Check connections of failed buttons

  9. Resolder broken connections
    • Resolder broken connections

    • Make sure the pads do not short

  10. Put back logicboard
    • Put back logicboard

    • Make sure pins near camera line-up

    • Note: Plastic clips need quite some force

  11. Reconnect logicboard connectors
    • Reconnect logicboard connectors

  12. Put back plastic cover
    • Put back plastic cover

  13. Gently tighten screws
    • Gently tighten screws

    • Put back SIM card and battery

    • Close cover

    • Enjoy the result ;)

Linea de Meta

11 personas más completaron esta guía.

Anne

Miembro Desde 17/10/14

456 Reputación

1 Guía escrita

Realmente funcionó el tutorial, sirven de nuevo los dos botones que fallaban.

Gaia501 - Contestar

Only the 2 middle screws are fine threaded. And you can see in the pictures here, that there are 4 coarse threaded ones and 2 fine threaded ones. The green one in the corner should be red

shadow118 - Contestar

hafıza kart okuyucu çalışmıyor ne yapmam lazım

davutcigir - Contestar

Omg it looks complicated

Maz Hanvey - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 9,761