Saltar al contenido principal

Nokia Lumia 620 LCD Display, Touch screen Glass

Qué necesitas

Resumen del Video

  1. Nokia Lumia 620 LCD Display, Touch screen Glass, Switch Off: paso 1, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass, Switch Off: paso 1, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass, Switch Off: paso 1, imagen 3 de 3
    • Switch off the phone, remove the battery and SIM (Memory) card.

    • The lower back cover is held by 3x T4 Torx screws.

    • The screws are of two types!

  2. Nokia Lumia 620 LCD Display, Touch screen Glass, Lower Back Cover: paso 2, imagen 1 de 2 Nokia Lumia 620 LCD Display, Touch screen Glass, Lower Back Cover: paso 2, imagen 2 de 2
    • Loudspeaker

    • Touch screen flex cable connector

    • LCD Display flex cable connector

  3. Nokia Lumia 620 LCD Display, Touch screen Glass, Touch screen Test: paso 3, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass, Touch screen Test: paso 3, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass, Touch screen Test: paso 3, imagen 3 de 3
    • If you want to replace the Digitizer, let's test the spare part first.

    • Be careful, don't break the flex cable.

  4. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 4, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 4, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 4, imagen 3 de 3
    • Another three screws hold the Upper Back Cover.

    • Disconnect the Touch screen and the Digitizer flex cables.

  5. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 5, imagen 1 de 2 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 5, imagen 2 de 2
    • If you have not yet disconnected the Digitizer and the Touch screen flex cables, do it now.

    • The Logic Board is held to the Middle frame by two plastic clips.

  6. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 6, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 6, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 6, imagen 3 de 3
    • With a plastic tool gently release the mother board and remove it.

  7. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 7, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 7, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 7, imagen 3 de 3
    • Front Camera and Proximity & Light sensor module

    • Earpiece

    • Remove them one by one.

  8. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 8, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 8, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 8, imagen 3 de 3
    • The Midle frame is held by 6x locking clips, three on each side. Release them and remove the Middle frame.

  9. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 9, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 9, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 9, imagen 3 de 3
    • Now gently remove the LCD Display.

    • If you have a broken LCD, replace it and reassemble the phone.

    • We will continue with removing the Touch screen Glass.

  10. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 10, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 10, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 10, imagen 3 de 3
    • Put a scotch tape to prevent the glass from scattering.

    • With a hot air warm the glass to soften the adhesive.

    • You can use a hair dryer for this operation.

    • Start with separating at the middle, where the bonded area is smaller.

  11. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 11, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 11, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 11, imagen 3 de 3
    • Continue with the separation by using a plastic tool.

  12. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 12, imagen 1 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 12, imagen 2 de 3 Nokia Lumia 620 LCD Display, Touch screen Glass: paso 12, imagen 3 de 3
    • Clean the remnants of the old adhesive tape.

    • If the spare parts come without adhesive tape, you must put by himself.

    • Prepare the new digitizer glass and install it.

    • Reassemble the device.

  13. Nokia Lumia 620 LCD Display, Touch screen Glass: paso 13, imagen 1 de 1
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Conclusión

To reassemble your device, follow these instructions in reverse order.

13 personas más completaron esta guía.

ZFix

Miembro Desde 12/09/13

191,308 Reputación

330 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,535 Guías creadas

2 comentarios

great guide! I made it quite easily, thanks so much

tave - Contestar

i am purchase urgent

priyamotors - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 9,941