To start, press one of the latches at the top of the phone to open the rear cover.
  • To start, press one of the latches at the top of the phone to open the rear cover.

Agregar Comentario

Carefully press the other latch.
  • Carefully press the other latch.

Agregar Comentario

  • Open rear cover by this side.

Agregar Comentario

  • Press the three latches to open this side of the cover.

Agregar Comentario

  • Remove the rear cover.

Agregar Comentario

  • Removed rear cover. See the latches .

Agregar Comentario

  • Remove the screws using Torx T6 screw driver.

Agregar Comentario

  • Remove six T6 screws.

Agregar Comentario

  • Remove the assembly. The front cover will be released.

Agregar Comentario

  • The front cover released.

Agregar Comentario

  • To remove the display , unscrew the T6 Torx at top.

Agregar Comentario

  • CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !

Agregar Comentario

  • Carefully disconnect the Flex cable connector. Then remove the display.

Agregar Comentario

  • Carefully remove the adhesive keyboard membrane.

  • You can replace it at this step if you need to.

Agregar Comentario

  • You can clean the keyboard surface with alcohol, if you dropped a drink here.

Agregar Comentario

  • When you replace the keyboard membrane, align the two contacts at bottom.

Agregar Comentario

  • You can wash the front cover and keyboard if they are dirty.

Agregar Comentario

  • Keyboard - clean it if necessary.

Agregar Comentario

  • Rear side of the circuit board.

Agregar Comentario

  • Speaker and antenna contacts.

Agregar Comentario

  • If necessary, you can replace the joystick, the button module or the connector housing.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 6

Todo El Tiempo: 6,712