Saltar al contenido principal

Nokia 8260 LCD Replacement

Qué necesitas

  1. Nokia 8260 LCD Replacement, Battery: paso 1, imagen 1 de 1
    • Turn off the cell phone.

  2. Nokia 8260 LCD Replacement: paso 2, imagen 1 de 1
    • Press down on the round button on the back cover of the phone.

  3. Nokia 8260 LCD Replacement: paso 3, imagen 1 de 1
    • Slide the back cover down while still pressing the button.

  4. Nokia 8260 LCD Replacement: paso 4, imagen 1 de 1
    • Remove the back cover.

  5. Nokia 8260 LCD Replacement: paso 5, imagen 1 de 1
    • Press the end of the battery towards the top of the phone.

  6. Nokia 8260 LCD Replacement: paso 6, imagen 1 de 1
    • Lift the battery outwards while still pressing it upwards till it pops out.

    • You may need to take several attempts to lift out the battery.

  7. Nokia 8260 LCD Replacement, Antenna: paso 7, imagen 1 de 1
    • Squeeze the flat end of the spudger into the crack right under the word "Nokia" on the back of the phone.

    • This step may be a bit difficult if you are removing the antenna for the first time.

  8. Nokia 8260 LCD Replacement: paso 8, imagen 1 de 1
    • Pry open the antenna door by pulling down the top of the spudger

  9. Nokia 8260 LCD Replacement: paso 9, imagen 1 de 1
    • Remove the antenna door.

  10. Nokia 8260 LCD Replacement: paso 10, imagen 1 de 1
    • If the gold antenna remained stuck to the door, you have finished removing the antenna from the phone.

    • If the gold antenna is still in the phone, carefully remove it and stick it onto the back of the door.

    • Try to keep the antenna as flat as possible. Do not bend it.

  11. Nokia 8260 LCD Replacement, Circuit Board: paso 11, imagen 1 de 1
    • Remove the five screws with the Torx Screwdriver: two near the bottom, two in the middle, and one under the antenna door.

    • The two bottom screws are longer than the upper three.

  12. Nokia 8260 LCD Replacement: paso 12, imagen 1 de 1
    • Remove the back covering.

  13. Nokia 8260 LCD Replacement: paso 13, imagen 1 de 1
    • Remove the two screws at the top.

  14. Nokia 8260 LCD Replacement: paso 14, imagen 1 de 1
    • Remove the metal plating and the circuit board.

    • There is nothing holding the rest of the phone together. Handle the rest of the phone carefully.

    • The LCD will be attached to the circuit board.

  15. Nokia 8260 LCD Replacement, LCD: paso 15, imagen 1 de 1
    • Detach the LCD from the logic board at the four metal hinges.

    • There are three pieces to the LCD: the front metal border, the LCD unit, and the plastic backing. Unless you are replacing the LCD, do not separate these three pieces.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Aaron Jen

Miembro Desde 04/11/10

1 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 27-94, Amido Spring 2010 Miembro de Cal Poly, Team 27-94, Amido Spring 2010

CPSU-AMIDO-S10S27G94

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 2,892