Saltar al contenido principal

Introducción

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Partes

No se especificaron partes.

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. Lift the front cover off.
    • Lift the front cover off.

  5. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  6. Kits del Apple Watch

    Las reparaciones de batería y pantalla son ahora más fáciles.

    Comprar Ahora

    Kits del Apple Watch

    Las reparaciones de batería y pantalla son ahora más fáciles.

    Comprar Ahora
  7. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  8. Remove assembly from phone
    • Remove assembly from phone

  9. The logic board now sits on top of the phone.
    • The logic board now sits on top of the phone.

  10. Lift the logic board out of the phone.
    • Lift the logic board out of the phone.

  11. Locate battery charger connector
    • Locate battery charger connector

  12. Grasp top and bottom of battery charger connector on the left side
    • Grasp top and bottom of battery charger connector on the left side

  13. Lift out the battery charger connector
    • Lift out the battery charger connector

  14. Grasp vibrator which protrudes from the battery charger connector
    • Grasp vibrator which protrudes from the battery charger connector

  15. Lift the vibrator out of the battery charger connector.
    • Lift the vibrator out of the battery charger connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Miembro Desde 05/10/10

1 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 22-3, Maness Fall 2010 Miembro de Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,081