Introducción

This Guide will show how the remove the phone's battery charger connector.

Partes

No se requieren partes.

Press the button to remove the back cover.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Agregar Comentario

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Agregar Comentario

  • Grip the front cover from the bottom.

Agregar Comentario

  • Lift the front cover off.

Agregar Comentario

  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Agregar Comentario

  • Insert spudger along edge of assembly and gently lift assembly away from case

Agregar Comentario

  • Remove assembly from phone

Agregar Comentario

  • The logic board now sits on top of the phone.

Agregar Comentario

  • Lift the logic board out of the phone.

Agregar Comentario

  • Locate battery charger connector

Agregar Comentario

  • Grasp top and bottom of battery charger connector on the left side

Agregar Comentario

  • Lift out the battery charger connector

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Miembro Desde 05/10/10

1 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 22-3, Maness Fall 2010 Miembro de Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Miembros

9 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,792